Frames
Frame part codes and quantities for every current Attaky Complete Build.
A Frame is the structure that holds the modules of a Complete Build together and gives the finished device its form. Use this section to identify the Frame parts supplied with your exact Complete Build.
Choose the exact Build
Builds with the same form do not necessarily use the same Frame parts. Open the Series and Build that match the name of your device.
Mesh Series
Retro Series
Radio Series
Agent Series
Cyber Series
Reading a Frame part code
Most Frame part codes begin with a three-symbol build prefix. The prefix identifies the Build the part was designed for. The final symbol, or final symbol pair, identifies its position on that Frame.
Build prefixes
| Prefix | Build | ID |
|---|---|---|
| ▮ ● ◤ | Mesh Deck Junior | 01 |
| ▮ ● ◢ | Mesh Pocket Junior | 03 |
| ▮ ● ◣ | Mesh Station Junior | 04 |
| ▮ ● ▲ | Retro Pocket | 05 |
| ▮ ● ◀ | Retro Arcade | 06 |
| ▮ ● ▶ | Agent Pocket | 08 |
| ▮ ● ◼ | Agent Station | 09 |
| ▮ ◤ ● | Radio Pocket | 10 |
| ▮ ◤ ◤ | Radio Station | 11 |
| ▮ ◤ ◥ | Cyber Deck | 12 |
| ▮ ◤ ◢ | Cyber Deck Plus | 13 |
Position symbols
| Symbol | Position |
|---|---|
| ◤ | Top-left |
| ◥ | Top-right |
| ▲ | Left 1 |
| ◼ | Right 1 |
| ◀ | Left 2 |
| ▶ | Right 2 |
| ◀ ▶ | Centre span (Left 2 + Right 2) |
| ● | Left 3 |
| ▼ | Right 3 |
| ◣ | Bottom-left |
| ◢ | Bottom-right |
| ◆ | An extra position not listed above |
| ▮ | The start marker; sometimes also used as an extra position not listed above |
Shared parts
A part can be shared between Builds. Its prefix still identifies the Build it was designed for, not necessarily the Build currently using it. For example, Mesh Station Junior reuses two Mesh Pocket Junior parts and adds two Station-specific parts. Always use the complete list on your Build's page.
For setup, controls, firmware, and care instructions, open Complete Builds.