Cyber Deck Plus 1.0

The Cyber Deck Plus 1.0 expands Cyber Deck with a full gamepad. It combines a color touchscreen, a 48-key QWERTY keyboard, directional and action controls, local storage support, a microphone, a speaker, and battery power in one portable Complete Build.

Overview

Cyber Deck Plus is for projects that need more than one input style. Use the keyboard for text, commands, labels, and configuration; use the gamepad for navigation, movement, selection, and immediate actions; and use the touchscreen for direct interaction. Firmware decides how all three input surfaces work together.

What's in the Box

This is a complete, pre-assembled build — everything needed to power, connect, and protect the device is included.

Device & modules

• 1× Attaky Cyber Deck Plus 1.0, pre-assembled with:
  • 1× Core: ESP32
  • 1× Expand: Media I/O
  • 1× Control: Gamepad (Bottom)
  • 1× Control: Keyboard (Bottom)
  • 1× Power: Standard Cell — battery included

Accessories

• 1× color-matched USB-C to USB-C cable — for charging and data; matched to your Attaky colorway where possible
• 1× USB-A to USB-C adapter
• 1× self-adhesive wrap cloth — for extra protection, organization, or surface cleaning
• 1× protective ESD moisture-barrier bag — for storage and component protection

Specs at a Glance

• Series / form — Cyber · Deck (keyboard + gamepad)
• Core — ESP32
• Display — 2.0-inch color touchscreen
• Controls — Core keys + full gamepad + 48-key QWERTY keyboard
• Media I/O — microSD card slot · microphone · built-in speaker
• Battery — 1000 mAh rechargeable lithium cell
• Firmware — installed separately; create a project or adapt compatible open-source firmware
• Size — 68 × 122 × 20.5 mm, 165.1 g

Full details are in Specifications below.

Anatomy & Controls

Cyber Deck Plus is built in three front sections: the Core and screen above, the gamepad in the middle, and the keyboard below. The Media I/O module sits behind the Core, while the Power module sits behind the keyboard.

Screen and Core controls:

• A 2.0-inch color touchscreen.
• Five keys down the right side: Up · Right · Enter · Left · Down.
• Four buttons across the top edge: L1 · boot · power · R1.
• A small status light — its color and blink pattern depend on the firmware.

The Gamepad

• A direction pad (D-pad) on the left.
• Four action buttons — A, B, X, and Y — on the right.
• Four shoulder controls — L1, L2, R1, and R2 — each available on both the top edge and front so it remains accessible when the build is stacked.
• Four function buttons for actions assigned by the firmware.

The Keyboard

• One integrated 48-key QWERTY keyboard for text, commands, shortcuts, and navigation.
• The keyboard is not backlit; its indicator lights are status indicators rather than key lighting.
• The firmware defines what every keyboard and gamepad input does.

Media I/O:

• A microSD card slot for firmware that needs local files, media, or game data.
• A built-in microphone and mono speaker for audio-capable projects.

Ports and power buttons:

• USB-C on the Core — charges the battery, installs firmware, and connects to a computer.
• A power button on the Core and a power button on the Power module — use them in the order described below.

First Boot & Charging

Charge It

Charge through the Core's USB-C port. A standard USB power source works, and the device can remain on while it charges. Give a new device a full charge before its first long session.

Power It On

Cyber Deck Plus has two power buttons — one on the Power module and one on the Core. The Power module supplies the device, so turn it on first.

Using Your Cyber Deck Plus

Cyber Deck Plus does not impose one fixed application. Compatible firmware can combine its touchscreen, QWERTY keyboard, gamepad, Core keys, microSD interface, microphone, speaker, motion sensing, and ambient sensing in different ways.

For example, a project can become a handheld interface, portable game, command console, field dashboard, media controller, or custom input device. The actual screen layout, key map, button map, file formats, network behavior, and audio features all come from the installed firmware.

Build Your Own Firmware

The AI Build Assistant helps turn an idea into firmware without starting from an empty project. It can help define the device experience, plan around a compatible Attaky module combination, design screens and navigation, prepare a build, and guide testing on the device.

It can also help assess and plan a port of existing open-source firmware. A port is possible only when Cyber Deck Plus provides the hardware features the software requires and the upstream license permits the intended adaptation. The finished firmware still needs to be built and tested on the actual device, including both Control modules.

Updating Firmware

Firmware is installed separately from the hardware. If a compatible firmware is available in the Attaky Firmware Store (fwstore.attaky.com), use its browser installer. For firmware you build yourself, follow that project's build and flash instructions.

Use a USB-C cable that carries data and connect it to the Core's USB-C port. Browser-based installers require Chrome or Edge on a desktop computer. Keep the device connected until the installation finishes and the Core restarts.

Specifications

Safety & Compliance

• Battery — charge from a normal USB source. Do not puncture, crush, open, or expose the Power module to extreme heat. Stop using it if the battery looks swollen or damaged.
• Heat & sunlight — use the device between 0 °C and 40 °C (32–104 °F). Keep it out of prolonged heat, direct sunlight, and direct UV; do not leave it in a parked car.
• Water & moisture — Cyber Deck Plus is not waterproof and has no IP rating. Keep it away from rain, splashes, and damp places.
• microSD card — switch off the device before removing a card when the firmware is writing files, or use the firmware's eject function if it provides one.

Troubleshooting

• It will not turn on — charge it first, then turn on the Power module before holding the Core's power button for about two seconds.
• It will not charge — use the Core's USB-C port with a working cable and a standard USB source. The Power module's USB-C port only works while the Core is off.
• A computer cannot find it — use a USB-C cable that carries data, try another USB port, and close other applications connected to the device.
• The keyboard or gamepad does not respond — confirm the firmware supports both Control modules and check its input map.
• The microSD card is not detected — confirm a card is inserted, then check the capacity, format, and folder layout required by your firmware.
• There is no sound or microphone input — check the firmware's audio settings and confirm it supports Expand: Media I/O.
• A feature does not work — make sure the firmware was built for the complete Cyber Deck Plus module combination, including both Control modules.

Support & Warranty

Please visit the Help Center page at the Attaky online shop.

Attaky Shop Help Center →